Soudafoam All Season is a very high yield, one component, moisture curing & low expanding PU-Foam developed especially to perform under both extreme low and extreme high temperature conditions where traditional PU-Foams fail to extrude and cure. In extreme cold conditions, the foam will even cure at ambient temperatures of -13°F with a can temperature of min. 41°F. In extreme hot conditions, the foam will even cure at ambient temperatures of 120°F with a can and surface temperature of max. 95°F.

Available in 24 oz. (Gun)

Technical Data:




Stable Foam,thixotropic

Curing System


Skin formation (68°F/65% R.H.)

8 minutes

Drying time (68°F/65% R.H.)

Dust free after 20-25 minutes

Curing Rate

See remarks


See remarks

Yield (ASTM C-1536) (for 24 oz)

4456 linear feet (1358m) @ ¼” (6.4 mm) dia. bead



Post Expansion


Cellular Structure

70-80% closed cells

Specific Gravity

1.44 lb/ft³ (extruded, fully cured)

Temperature Resistance

-40°F to +194°F when cured



Fire Class (DIN 4102 part 2)


Insulation factor

4.1 for 1 inch

Shear strength (ASTM C-273)

8.70 psi

Compressive strength (ASTM D-1621)

4.35 psi

Tear strength

17.40 psi

Water absorption

1% Vol


SoudaFoam All Season is a top of the line one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions or in hot conditions where traditional PU foams fail to extrude and cure. The foam will extrude at ambient temperatures as low as -13°F and as high as 120°F with a can temperature of minimum 41°F and maximum 95°F respectively.


  • Excellent adhesion on most substrates (except PTFE, PE and PP)
  • High thermal and acoustical insulation
  • Very good filling capacities
  • Excellent mounting capacities
  • Excellent stability (no shrink or post expansion)
  • Does not slump at low temperatures
  • Can be applied at frost temperatures
  • Very precise application due to the foam gun system


  • Aerosol can 24oz

  • Always store can with the valve pointed upwards

  • 18 months in unopened packaging in a cool and dry storage place at temperatures between 41°F and 77°F.

  • Always store can with the valve pointed upwards


Shake the aerosol can for at least 20 seconds. Fit the gun on the adapter. Moisten surfaces with a water sprayer prior to application. Fill holes and cavities approximately 65%, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Foamcleaner or acetone. Cured foam can only be removed mechanically.

Can and surface temperature 41°F to 95°F. (50°F- 77°F recommended), the foam will even cure at ambient temperatures of 120°F (41°F-86°F recommended).

Foam Yield and Curing Time:

Temperature of can must be greater than 41°F
Ambient Temperature 68°F 32°F 14°F -13°F
Approximate Yield (Gallons) 13 8 7 6
Cure Time (Hours) 1.5 3-5 8-10 10-12
Approximate lineal feet @ ¼” bead 4005 2448 2142 1836

ASTM C1620
UL 723
UL 1715


  • Installing of window and doorframes
  • Filling of cavities
  • Sealing of openings in roof construction
  • Connecting insulating materials and roof construction
  • Application of a soundproofing layer on motors
  • Improving thermal isolation in cooling systems

Shelf Life

  • 18 months in unopened packaging in a cool and dry storage place at temperatures between 41°F and 77°F.

  • Always store can with the valve pointed upwards.

Health- and Safety Recommendation:

  • Apply the usual industrial hygiene.
  • Wear gloves and safety goggles.
  • Remove cured foam by mechanical means only, never burn away
  • Consult the label for more information


  • Cured PU foam must be protected from UVradiation by painting or applying a top layer of sealant (silicone, MS Polymer, acrylic and PUsealant)
  • Work in layers and repeat moistening after each layer

Limited Warranty:

SOUDAL warrants product to be of good quality and will replace or, at our election, refund the purchase price of any products proved to be defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, SOUDAL MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and SOUDAL shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.

*For the most up to date version click to download the Technical Data Sheet