How To Use

Precautions for Safe Handling

Keep away from heat, sparks, open flame, and hot surfaces – No smoking. Do not spray on an open flame or other ignition sources. Do not pierce or burn, even after use. Wash thoroughly after handling. Do not eat, drink, or smoke when using this product. Wear protective gloves/clothing and eye/face protection. Take off contaminated clothing and wash before re-use. Contaminated work clothing should not be allowed out of the workplace. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. [In case of inadequate ventilation] wear respiratory protection. Obtain special instructions before use. Do not handle until all Page 4 of 10 safety precautions have been read and understood. Use explosion-proof electrical/ventilating/lighting equipment.

 

Conditions for Safe Storage, Including any Incompatibilities

Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50C/122F. Ensure adequate ventilation of the storage area. Maximum storage period (time): 1 year.

 

Incompatible Materials

Heat, strong acids, strong bases, Amines. Keep away from all ignition sources.

Shake the aerosol can for at least 30 seconds. Fit the adapter on the valve.

Apply a fine water spray to the surface which needs to be clean and free of grease and dust. Turn around the canister and extrude the foam carefully by applying pressure on the trigger. Fill holes and cavities approximately 40-50% (Mega Straw and Genius Gun Max) or 65% (Gun Foam) as the foam will expand. Shake canister regularly during application. If foam is applied in several layers, moisten between each layer of foam. Fresh foam can be removed using Soudal Foam cleaner or acetone. Cured Foam can only be removed mechanically. Application temperature 41°F to 95°F. (68°F to 77°F recommended)

Shake the aerosol can for at least 30 seconds. Fit the adapter on the valve.

Apply a fine water spray to the surface which needs to be clean and free of grease and dust. Turn around the canister and extrude the foam carefully by applying pressure on the trigger. Fill holes and cavities approximately 40-50% (Mega Straw and Genius Gun Max) or 65% (Gun Foam) as the foam will expand. Shake canister regularly during application. If foam is applied in several layers, moisten between each layer of foam. Fresh foam can be removed using Soudal Foam cleaner or acetone. Cured Foam can only be removed mechanically. Application temperature 41°F to 95°F. (68°F to 77°F recommended)

Shake the canister thoroughly for 30 seconds. Open the lid on the top and straighten the applicator.

Apply a fine water spray to the surface which needs to be clean and free of grease and dust. Turn around the canister and extrude the foam carefully by applying pressure on the trigger. Fill holes and cavities approximately 40-50% (Mega Straw and Genius Gun Max) or 65% (Gun Foam) as the foam will expand. Shake canister regularly during application. If foam is applied in several layers, moisten between each layer of foam. Fresh foam can be removed using Soudal Foam cleaner or acetone. Cured Foam can only be removed mechanically. Application temperature 41°F to 95°F. (68°F to 77°F recommended)

At the end of application, close the applicator tube screwing the sealing plug onto the Max adapter and click into the holder. Close the lid. The canister can be reactivated for up to 6 weeks if resealed correctly.

Note: How to Reuse Genius Door & Window Foam
Before reusing, unscrew the red Soudamax adapter including the red T-plug from the tip of the straw. Keep the can straight up, point the straw into a plastic bag and shoot the contents of the straw into it. It may take one or two triggers to remove all the straw’s contents. Screw the Soudamax adapter back into the straw. Then unscrew the red T-plug from the red Soudamax adapter at the end of the straw to start working.

Soudal 50 year logo